Reduced price! AKM AK47 Builder Tooling and Fixture Bundle View larger

AKM AK47 Builder Tooling and Fixture Bundle

AK47TOOLS

New product

The tools included in the AK47 (80%) Builder Tools and Fixtures kit, comes with every jig, fixture, and tool needed to complete an AK47 build.  Using a hand drill and a press that can be found cheap at most local hardware stores you can build your own AK.  It's taken us a lot of time to ensure it's ready for beginners and veterans alike to start building immediately, no welding or bending needed.

More details

This product is no longer in stock

$494.95

-$60.00

$554.95

More info

The tools included in the AK47 (80%) Builder Tools and Fixtures kit, comes with every jig, fixture, and tool needed to complete an AK47 build.  Using a hand drill and a press that can be found cheap at most local hardware stores you can build your own AK.  It's taken us a lot of time to ensure it's ready for beginners and veterans alike to start building immediately, no welding or bending needed.

The tools included in the AK47 (80%) Builder Tools and Fixtures kit, along with the methods used, are the result of lots of frustration, time,  and failure. In short, we asked ourselves,  “why is it that everyone out there building their own black rifles is not building AK’S?

We came to the conclusion that it wasn't for lack of a desire to own one. but rather a stigma looming over the Tooling and necessary skills required to do so. We learned one thing! There's no easy ways and there's no right way, it's up and over or two times around! But with a little elbow grease and loss of finger we guarantee it's within your reach. At the forefront of the development here was the concept that we would take traditionally held thoughts on the methodology requiring large tools that some guys might not have or even have room to store and make  this something that anyone could do under any a circumstance ban space constraints. Happy building

Includes: 

  • Riveting jig fixture platform with integrated press plate
    • Long Rivet Attachment
    • Long Rivet Press Spring
    • Long Rivet Attachment Screw
    • Short Rivet Tower
    • Short Rivet Arm
    • Short Rivet Arm Set Screw
    • Short Rivet Arm Guide Screw
    • Long Rivet Guide
    • Long Rivet Guide Screw Locking Nut
  • Internal Receiver Spacer
  • Fully Enclosed AK Receiver Drilling Fixture
    • Front Plate
    • Back Plate
    • Top Plate
    • Right Side with proper location for all drilling needed
    • Left Side with proper locations for all drilling needed
    • Bottom Plate with Trigger Guard hole locations for drilling
  • Long Rivet Guide Screw
  • Dimple Backing Disk
  • Finished Receiver Barrel Push
    • Finshed Receiver Barrel Push Screw Short
    • Finished Receiver Barrel Push Screw Long
  • Barrel Push Out Ram
  • Long Rivet Ram
  • Barrel Pin Ram
  • Dimple Ram Long Rivet
  • Trigger Guard Rivet Ram
  • Rivet Backing Plate
  • Barrel Pin Press Plate
  • Trigger Guard Rivet Press Plate
  • 5/32 Carbide Drill Bit
  • 7/32 Carbide Drill Bit
  • 5mm Carbide Drill Bit
  • 7mm Carbide Drill Bit
  • 10mm Carbide Drill Bit                  


Tools Not Included but Needed
Ball Peen Hammer(up to 3 different sizes recommended)
Basic Setup of standard size screwdrivers & pliers(needle nose recommended)
Drill 
Files(preferably a needle & standard set)
Irwin Vice-Grip 7LW-Hex Nuts

Reamers 5 & 7mm: Used on the access pinholes for a tight fit        

Recommended but Not Needed
Bench Vise 
Drill Vise 
Pin Punches

HIGHLY RECOMMENDED BUT NOT NECESSARY:
This will make your life so much easier!
Dremel with Stone Rotary Grinding Bits

*If drill bits break its most important the access pin holes are perfect size so a 3/16 drill bit can be used in place of 5mm & ¼ drill bit in place of 7mm, followed by the reamers in the tool kit to achieve the perfect size holes. A 5/32 is the size we give you but this is a standard size available at any local hardware store.