AKM AK47 Builder Tooling and Fixture Bundle

AK47TOOLS

New product

The tools included in the AK47 (80%) Builder Tools and Fixtures kit, along with the methods used, are the result of lots of frustration, time,  and failure. In short, we asked ourselves,  “why is it that everyone out there building their own black rifles is not building AK’S?

More details

This product is no longer in stock

$349.00

More info

The tools included in the AK47 (80%) Builder Tools and Fixtures kit, along with the methods used, are the result of lots of frustration, time,  and failure. In short, we asked ourselves,  “why is it that everyone out there building their own black rifles is not building AK’S?

We came to the conclusion that it wasn't for lack of a desire to own one. but rather a stigma looming over the Tooling and necessary skills required to do so. We learned one thing! There's no easy ways and there's no right way, it's up and over or two times around! But with a little elbow grease and loss of finger we guarantee it's within your reach. At the forefront of the development here was the concept that we would take traditionally held thoughts on the methodology requiring large tools that some guys might not have or even have room to store and make  this something that anyone could do under any a circumstance ban space constraints. Happy building

Includes: 

Anvil Rivet Backing Plate: Our Ghost Gun Exclusive Mini Anvil, modified with correct rivet patterns for our Build Kit           
Rivet Tool: Hammer driven bit used to form the tail end of the long rivets           
Bolt Cutter Rivet Jaws: Used to crush the short rivets on the front trunnion           
Drill Bit 5/32: Necessary to complete 80% Receiver Blank           
Drill Bit 7/32: Necessary to complete 80% Receiver Blank           
Drill Bit 5mm: Necessary to complete 80% Receiver Blank           
Drill Bit 7mm: Necessary to complete 80% Receiver Blank           
Drill Bit 10mm: Necessary to complete 80% Receiver Blank           
FCG Layout Guide: Template that aligns the location for drilling the AKM receiver blank           
Muzzle Press Nut: Has same threads as AKM Barrel 14x1 LH for use on the end of barrel to drive back into trunnion after riveting           
Headspace gauges GO NOGO: Used to determine proper barrel & trunnion placement           
14' Transfer Punch: Used to mark drilling locations on the blank & used as spacer for the clamps           
Spotwelder Lower Tong: Used to attach to the spot welder as a modification for AKM building (Specific for the spot welder found on Harbor freight)           
Upper Tong Extension: Used to attach to the spot welder as a modification for AKM building (Specific for the spot welder found on Harbor freight)                     
Trunnion locator tool: To locate the drilling locations on the blank for the front trunnion              
1 14' X 2" Steel Plate: For maintaining the shape of the blank during drilling           


Tools Not Included but Needed
Ball Peen Hammer(up to 3 different sizes recommended)
Harbor Freight 110 Spot Welder
Basic Setup of standard size screwdrivers & pliers(needle nose recommended)
Drill 
Files(preferably a needle & standard set)
Irwin Vice-Grip 7LW-Hex Nuts

Reamers 5 & 7mm: Used on the access pinholes for a tight fit        

Recommended but Not Needed
Bench Vise 
Drill Vise 
Pin Punches

HIGHLY RECOMMENDED BUT NOT NECESSARY:
This will make your life so much easier!
Dremel with Stone Rotary Grinding Bits

*If drill bits break its most important the access pin holes are perfect size so a 3/16 drill bit can be used in place of 5mm & ¼ drill bit in place of 7mm, followed by the reamers in the tool kit to achieve the perfect size holes. A 5/32 is the size we give you but this is a standard size available at any local hardware store.